DynaGen AST3225 Instalasi dan Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Beralih DynaGen AST3225. DynaGen AST3225 19 halaman. Automatic transfer switch

Halaman Cetak

6: FIELD SET-UP

6:1 Locking Mechanism

The AST3225 enclosure can be equipped with an optional locking mechanism

(parts required: locking mechanism and locking mechanism gasket), which

allows the Transfer Switch to be securely locked, and eliminate any form of

tampering with the switch. The locking mechanism can mount on either one of

the quarter turn door latches. The mounting procedure is as follows:

1). Open the door of the enclosure.

2). On the back of the enclosure door, remove the Philips head screw, which

secures the quarter turn latch.

3). Remove the quarter turn latch.

4). From the front of the enclosure, remove the quarter turn insert, rubber

gasket, and flat washer.

5). Remove the lock nut located on the back of the enclosure door.

6). On the back of the enclosure door, gently tap the quarter turn latch housing

until it is free from the door. NOTE: carefully observe how the quarter turn

latch housing is inserted in the door, as it has to be put back in the door in

the exact same manner.

7). Remove the quarter turn latch housing and the quarter turn latch housing

rubber gasket.

8). Place the locking mechanism gasket over the hole in the enclosure door,

and the locking mechanism over the gasket (the hasp on the locking

mechanism would go closest to the edge of the enclosure).

9). Repeat steps 2 through 7 in their reverse order.

Automatic

Manual for AST3225

Transfer Switch