GAI-Tronics 701-904 SmartSeries Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat GAI-Tronics 701-904 SmartSeries. GAI-Tronics 701-904 SmartSeries 17 halaman. Handset/speaker amplifier with auxiliary jack

Halaman Cetak

701-904 S

MART

ERIES

ANDSET

Auxiliary Headset Operation

The auxiliary headset allows the user to make page announcements and conduct party-line conversations

hands-free from up to 30 feet from the station, while providing noise reduction for hearing protection.

When an auxiliary headset/cable assembly is plugged into the auxiliary jack, a party-line connection is

automatically established (the same as lifting the handset).

OTES

1. Allowing the auxiliary headset to remain plugged in for a long period of time may disable party-line

communication. This condition is controlled by the off-hook time-out setting, which can be

programmed for 1 to 25 minutes in 1-minute steps (the factory default is 8 minutes) or it can be

disabled. This feature ensures that a station unintentionally left connected to a party line will not

induce unwanted background noise onto the party line. If party-line communication is disabled,

unplug the auxiliary headset, then plug it back in.

2. The auxiliary headset has priority over the handset. When the user lifts the handset from the cradle

while the auxiliary headset is in use, the handset's microphone and page switch are disabled, but the

handset receiver remains active.

3. This application requires the GAI-Tronics 10401-201 Headset/Microphone Assembly and 10416-103

Extension Cable.

Page Announcement

To make a page announcement for a party-line conversation, perform the following steps:

1. Plug the auxiliary headset/cable assembly into the auxiliary jack on the front panel.

2. Press the headset page switch.

3. Make your announcement when the wait tone stops.

If the page resource is already in use you hear a busy tone. Release the headset page switch, then try

again.

4. Release the headset page switch.

5. When the party answers, conduct your conversation.

6. Unplug the auxiliary headset/cable assembly when the conversation has ended.

Party-Line Conversation

To conduct a party-line conversation, perform the following steps:

1. For a multi-party enclosure, select the appropriate party line.

2. Plug the auxiliary headset/cable assembly into the auxiliary jack on the front panel.

3. Conduct your conversation.

4. When you are finished, unplug the auxiliary headset/cable assembly.

f:\standard ioms - current release\42004 instr. manuals\42004-719l2b.doc

03/11

PEAKER

MPLIFIER WITH

UXILIARY

ACK

Pub. 42004-719L2B

7 of 15

AGE