DynaGen TR100-E Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Panel Kontrol DynaGen TR100-E. DynaGen TR100-E 12 halaman. Digital generator controllers

Using the Remote

The time, date, and reason for the failure w ill be displayed on the screen. To reset the failure press and hold off until the

controller goes back to the OFF state. Then release the OFF button. The remote w ill do a reset and the screen w ill flicker.

This is normal.

This is the screen that w ill be displayed w hen the controller is in the OFF mode after the failure has been reset.

3.3

Front Panel Menu

There are several settings the operator can change in the remote. The menu can only be accessed w hen the local controller

is in the OFF or AUTO modes. By pressing the Enter button the menu can be accessed.

The follow ing screen show s the main menu of the menu system. To exit the menu system at any time press and hold OFF

until you exit the menu.

The cursor is the solid bar. Press the up and dow n keys to move the curser up and dow n. Moving the cursor to Back and

pressing enter w ill exit the menu (or take you to the previous menu). "Operator Setup" and "Device Info." are sub-menus as

indicated by the right pointing arrow s. Scrolling dow n and pressing enter on one of them w ill take you to that submenu.

3.3.1

The Operator Setup menu contains the follow ing items (The items in bold are submenus.).

Nam e

Lamp Test

Display

Date/Tim e

TOUGH Series Manual

Range

Description

Function

Performs a lamp test.

Sub menu

Contains settings that control the screen and parameter

display behavior.

Sub menu

Date and time settings.

Operator Setup