Automatic Technology Megacode Tricode 128 Manual - Halaman 15
Jelajahi secara online atau unduh pdf Manual untuk Penerima Automatic Technology Megacode Tricode 128. Automatic Technology Megacode Tricode 128 20 halaman. Multi-frequency four channel receiver
Halaman Cetak
Appendix
B - Viewing and Editing Parameters
View Mode (No cursor)
Parameter number in list
1: Output Pulse
Time
Enter Edit
Mode
Fig B.1
Displays previous
parameter in list
Returns back to menu
Edit Mode (Cursor shown)
Cursor shown
1: Output Pulse
Increase
Time
value
Fig B.2
Displays "Load
Default?" screen,
giving option of
loading default value
Parameter name
Parameter
1.0
value
Displays next
parameter in list
Enter Edit Mode
Displays "Load
Default?" screen,
giving option of
1.0
loading default
value
Saves new
value and exits
back to View
Decrease
Mode
value
Exits back to View Mode
with no changes made
This section illustrates how to locate, view and adjust parameters.
Locating parameters
Refer to Appendix A for Consile Menu Structure. Locate the required
parameter and note the MENU number. The example used in
(Fig. B.1)
displays "Output Pulse Time"
Changing Setting
a. Press NEXT/PREV to navigate to the required menu.
b. Press SET to show the sub-menu.
c. Press NEXT/PREV to go to the required sub-menu.
d. Press UP/DOWN to change parameter setting. Holding the
button down causes the parameter's value to change rapidly.
The longer the button is held the faster the value changes.
e. Press SET to SAVE setting.
Reload Default Setting
a. Press NEXT/PREV buttons to display LOAD DEFAULT screen.
b. Press SET to load the default value.
Return To Menu
If the parameter's value is not to be changed, press EXIT to return
to the submenu. Press EXIT again to return to the MAIN SCREEN.
Installation Instructions MegaCode
Receiver
15
®