Dynalabs DYN-MS-440 Panduan Produk - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Produk untuk Penyemprot Cat Dynalabs DYN-MS-440. Dynalabs DYN-MS-440 14 halaman. 440 n ms shaker
Halaman CetakAll rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.
3) Operation and Installation
3.1) General
Refer to the figure below that shows the shaker connector configuration. Connect
the shaker/amplifier cable to the shaker and amplifier. Connect the drive signal
cable to the signal generator and connect the power cable of the amplifier.
Then
turn on the amplifier by pushing the on/off button. To increase gain up, turn the
gain knob in clockwise direction. The user must turn off the gain button in order
to power down the shaker.
8