HID iCLASS RW400 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembaca Kartu HID iCLASS RW400. HID iCLASS RW400 3 halaman.
Juga untuk HID iCLASS RW400: Instalasi (2 halaman), Instalasi (2 halaman)

Halaman Cetak

Installation Guide

iCLASS™ Reader Models R10, R30, R40, RW300, RW400

Red/Yellow

***DTR (Not Used)

Drain

**Shield Ground

* Optional Connections.

FCC WARNING:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation. For proper regulatory compliance, the drain wire should not be connected to ground at the power supply

end of the cable. The reader is intended to be powered from a limited power source output of a previously certified power supply.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment.

An ASSA ABLOY Group company

_____________________________________________________________________________________________________

HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690

Web page - www.hidcorp.com e-mail – [email protected] iClass ™ Reader Installation Manual 6090-900 Rev 8

** Drain wire can be data return line when a separate power supply is used.

•

Hold Input – when asserted, this line either buffers a card

read or disables a card read until released, as configured.

*** Not used on R10, R30, R40

ASSA ABLOY

Page 3 of