Gaia Baby CO-SLEEPING CRIB Manual Petunjuk Perakitan - Halaman 17
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Furnitur Bayi & Balita Gaia Baby CO-SLEEPING CRIB. Gaia Baby CO-SLEEPING CRIB 20 halaman.
Halaman CetakRemoving the crib from the stand
Pull the locking pins
on the base rails under
the base of the crib
outwards until they lock
in place with a CLICK.
Lift the crib off the stand
and place it on the floor.
Important: NEVER
remove the crib section
with a baby in it.
You can also use the crib
section off the stand.
Ensure the crib section
is on a level surface.
Important: NEVER
place the crib on a raised
surface other than the
stand provided with it.
CHINA Co-sleeper V3.indd 17
Fitting the crib to the stand
Pull the locking pins
on the base rails under
the base of the crib
outwards until they lock
in place with a CLICK (A).
CLICK
Lower the crib onto the
stand (B).
IMPORTANT: Ensure the
base rails on the crib are
positioned over the rails
on the stand.
Check the pins on the
locks are aligned with
the locking holes in the
stands rails.
Press the release button
(C) on the lock to release
the pin (D).
Ensure the pins are in
the holes on the stand
rails.
A
B
C
D
18/08/2022 10:44
17