Gaia Baby CO-SLEEPING CRIB Manual Petunjuk Perakitan - Halaman 3

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Furnitur Bayi & Balita Gaia Baby CO-SLEEPING CRIB. Gaia Baby CO-SLEEPING CRIB 20 halaman.

Halaman Cetak

parts of the body or clothing (e.g. strings, necklaces, ribbons for babies'

dummies, etc.), which would pose a risk of strangulation.

• Important - "Co-Sleeper Adapter mode (Fixed to the parent's bed)",

before laying the child in it, make sure that the connection belts are

hooked and tensioned properly, the product must be secured to the

parents' mattress and no gaps between the products and the adults'

mattress must be present.

• The product must always be placed on a horizontal surface. Never

leave the product on an inclined surface with the child inside of it.

• Children must not be permitted to play without supervision near the

product.

• Do not use the product without the side panel (textile).

• Keep the fastening belts away from the reach of children.

• Co-Sleeper Adapter MODE (FIXING TO THE PARENT'S BED) The crib

can be fixed to the parent's bed (Co-Sleeper Adapter mode).

• WARNING - IMPORTANT FOR THE SAFETY OF YOUR CHILD: this

method is only possible with bed types that comply with all of the

conditions described in this paragraph. In particular the side support

of the crib should always be put close to the parent's mattress and the

mattress should always be aligned with the height of the side support

for restraint of the crib (see fig. "step 13"). Furthermore, the crib should

be firmly fixed to the structure of the parents bed or to the mattress

support (net or slats).

• WARNING: Check to make sure that the crib in the Co-Sleeper Adapter

mode does not interfere with the parent's bed.

• WARNING: During use, make sure that the parents bed sheets,

blankets etc. do not enter and cover the interior of the crib.

• In order to fix the crib to the parents bed (Co-Sleeper Adapter mode)

use the pair of straps provided. Fix the straps around the structure of

the parent's bed, from the bottom towards the top and fix the buckle

CHINA Co-sleeper V3.indd 3

to form a loop. Repeat this operation on the other side. For easier

installation, during fixing of the buckles, we suggest that the crib is

kept at a short distance from the parent's bed. At this point, move

the crib to the side of the parent's bed and tighten the loop by pulling

the belts firmly. Carry out this operation on one side and then on the

other side, adjusting the belts until the crib is firmly in contact with the

parents mattress.

• WARNING: Before every use always check to make sure that there

is no space between the parent's mattress and the side of the crib. If

there is, pull the belts firmly to tighten until there's no space and the

permitted condition of use has been restored.

• WARNING: When the product is used in the "Co-Sleeper Adapter

Mode" {fixing to the bed, it should always be fitted to the long side of

access to the bed. DO NOT fix the product to the head or bottom of the

bed.

• Recommend mattresses sizes:

Co-sleeper crib: 78cm long x 36cm wide x 3.5cm depth

18/08/2022 10:44