AUTOMATION 2000 DGPT2 Series Petunjuk Teknis - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Teknis untuk Transformator AUTOMATION 2000 DGPT2 Series. AUTOMATION 2000 DGPT2 Series 17 halaman.

When you tighten the HM8 bolts on the DGPT2



The tighten coupling is not higher than 3 m.kg (30 N.m).



The DGPT2

(the FPM seal should stay visible – approx. 1 or 2 mm).



The DGPT2

steps. During the first step, use a loose tighten coupling on all fixing hooks.

During the second step, use a tighten coupling not higher than 3 m.kg

(30 N.m).

The DGPT2

drain tap's leakproofness is insured by a FPM seal positioned at the root of

the screw thread undercut.



NEVER USE Teflon

leakproofness through its screw thread.

TECH. INSTRUCTIONS

DGPT2

A U T O M A T I O N 2 0 0 0

IGHTENING PRECAUTIONS

attachment flange DOES NOT TOUCH the transformer cover

fixing hooks are tightened one after the other, clockwise in two

EAKPROOFNESS PRECAUTIONS

tape (or similar tape) to insure the DGPT2

fixing hooks, make sure that:

Page

N° T/NOT-0021

drain tap's

Rev.

Date: 28/09/16