Celestron 21023 Panduan Pengaturan Cepat

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Teleskop Celestron 21023. Celestron 21023 10 halaman. Tabletop telescope

Q U I C K S E T U P G U I D E

FINDERSCOPE

OPTICAL TUBE

Loosen the thumbscrews on the focuser and remove the focuser cap.

Loosen the altitude lock nut by turning it clockwise and hold the

bottom of the tube with your other hand.

Focus your telescope by turning the two knobs under the eyepiece

until you have a sharp image.

#21023

1 1

EYEPIECE

FOCUS KNOB

TUBE END

ALTITUDE LOCKING NUT

Verify that all parts are present. Your Cometron FirstScope 76

PREASSEMBLED BASE

telescope includes the preassembled base, optical tube, fi nderscope

assembly, and two eyepieces.

Insert the chrome barrel of the eyepiece into the focuser and secure

with setscrews.

Look through the fi nderscope and roughly point your telescope at your

target.

NOTE: Align the fi nderscope fi rst before proceeding. See the next

page for directions.

Celestron's free SkyPortal app for iOS and Android can

help you locate and identify a wide array of celestial

objects quickly and easily.

To install the fi nderscope, remove the nuts on side of tube, place the

fi nderscope bracket over threaded posts and replace the nuts.

Remove main telescope lens cap and caps on the fi nderscope.

Center your target in the fi nderscope's fi eld of view. Then make sure

it is in the telescope eyepiece's fi eld of view and tighten the altitude

lock nut.

2835 Columbia Street • Torrance, CA 90503 U.S.A.

celestron.com/pages/warranty

SOLAR WARNING: Never attempt to view the sun through any

telescope without a proper solar fi lter.

NEED ASSISTANCE?

Contact Celestron Technical Support

celestron.com/pages/technical-support

Printed in China

09-22