Dynalink RTA020 Panduan Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Router Jaringan Dynalink RTA020. Dynalink RTA020 6 halaman.

A web browser is required to enter your Internet account user name &

password. Make sure your web browser is Internet Explorer 5.0/Netscape 6 or

better. Install either Explorer 5.5 or Netscape 6 from the provided CDROM if

your computer does not have a suitable browser.

Remember to obtain these from your ISP:

! Login user name and password

! Public IP address (only if you subscribe for static IP)

! DNS server IP.

Step 1. Connect it up

If you require a step-by-step guide for this please refer to Page 5 Chapter 2

Hardware Description & Installation of the User Manual.

Connect the DSL port of the router into your ADSL jackpoint (telephone wall

socket) with the provided ADSL line cord. Never connect through an

ADSL micro filter.

Connect the LAN port of the router and the Ethernet port of your computer

(or uplink port of a network hub) with the Ethernet cable provided.

Connect the supplied 16VAC power adapter to the PWR jack of router, and

plug the adapter into a mains power outlet. Switch on router.

Make sure the LAN light on the front panel of router is on. Otherwise it

suggests a problem with the

Ethernet connection.

Step 2. Prepare your

computer

Set your computer's IP address to

192.168.1.x (x is between 2 and

254) and Subnet mask

255.255.255.0. Add gateway as

192.168.1.1 and enter DNS server

IP. A step-by-step guide can be

found on Page 19 Chapter 4

Setting Up PC on the LAN of the User Manual. The following is an example

for Windows 98/Windows ME:

From Control Panel, double click Network.

Scroll down to highlight TCP/IP -> (your network card). Click on

Properties.

Select IP Address. Specify

192.168.1.x and 255.255.255.0. (x

is between 2 and 254)

Select Gateway. Put in the router's

IP address 192.168.1.1.