Dynalink RTA1335 Panduan Pengaturan Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Router Jaringan Dynalink RTA1335. Dynalink RTA1335 16 halaman. Adsl2+ 4-port modem router
Juga untuk Dynalink RTA1335: Brosur & Spesifikasi (3 halaman)

Halaman Cetak

ADSL 2+ 4-Port Modem Router Quick Set-up Guide

PPPoE

Caution - Only follow this section if your ISP advises explicitly the service is

PPPoE. If you have followed the procedure below by mistake, reset router to

factory default will restore router to the standard New Zealand setting.

From the Quick Start menu click on Quick Setup to configure for PPPoE.

1. Untick the Auto Scan Internet Connection box. VPI and VCI shall be set to 0

and 100 respectively. Click Next for the next page.

2. Select PPP over Ethernet (PPPoE). Encapsulation shall be LLC/SNAP as

illustrated below. Go to the next page, change nothing and then Next.

3. You can enter your Internet account User Name & Password now. If you leave

the space as blank, you will be asked to do it later. Go Next.

4. Do not change the network configuration unless you are an advanced user

having your own preferences. Go Next.

5. A summary of the configuration is displayed. Check carefully that the setting

is VPI/VCI = 0/100, Connection Type is PPPoE LLC/SNAP. Then click Finish

to confirm the changes. The router will restart itself automatically to activate

the new setting.