Dynalink 56K e-modem III Panduan Pengaturan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Modem Dynalink 56K e-modem III. Dynalink 56K e-modem III 6 halaman. 56k internal modem
Juga untuk Dynalink 56K e-modem III: Panduan Pengaturan Cepat (9 halaman)

Halaman Cetak

Install the modem drivers

1. Power ON your PC

2. To install a driver, return to the previous menu and click the MODEM DRIVERS

button if you are reading this Quick Set-Up Guide from the supplied Dynalink CD.

Otherwise, load the supplied Dynalink CD, go to product page and click the

MODEM DRIVERS button. Double click SETUP.EXE to begin driver installation

3. Windows

Windows XP : System will automatically install a driver BUT you must follow the

steps here to update to the newer driver we supply.

Click Start-Settings-Control Panel-System-Hardware-Device Manager. Double click

Modems and right-click on Lucent Win Modem. Select Update Driver. When Hardware

Update Wizard appears, select Install from a list or specific location - Next. Select

Search for the best driver, and then choose only the option Include this location in

the search. Browse to locate the path of the driver: D:\Driver\WinXP (substitute D:

with your CD drive letter), then OK – Next. If a compatibility message appears, click

Continue Anyway. Click Finish to complete updating driver.

Windows 2000: Select Search for a suitable driver for my device-Next then Specify

a location- Next. Browse to D:\Driver\Win2K (substitute D: with your CD drive letter),

then OK–Next. If Digital Signature Not Found appears click Yes to continue and Finish

to complete driver installation.

Windows ME: System will automatically install a driver BUT you must follow the

steps here to update to the newer driver we supply. Click Start–Run. Click Browse to

Open Setup.exe from D:\Driver\WinME (substitute D: with your CD drive letter). Click

OK to confirm.

Windows 98: Select Search for the best driver for your device-Next then Specify a

location. Browse to D:\Driver\Win9x (substitute D: with your CD drive letter). Click

OK–Next–Next-Finish. Windows will continue to detect another device. Click Next and

repeat the above process to complete driver installation.

Windows 95: Click Next when Update Device Driver Wizard appears. Select Other

Locations. Browse to D:\Driver\Win9x (substitute D: with your CD drive letter) –OK-

Finish. When Insert Disk appears, click OK. Browse to D:\Driver\Win9x (substitute D:

with your CD drive letter) –OK. Windows will continue to detect another device. Click

Next and repeat the above process to complete driver installation.

Windows NT4.0: Click Start–Run. Click Browse to Open Setup.exe from D:\Driver\NT40

(substitute D: with your CD drive letter). Click OK to confirm, and then OK to restart.

(except NT4.0) will report that it has detected a new device.