Automation Direct ProSense VFS50-10-1001 Panduan Petunjuk Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur Automation Direct ProSense VFS50-10-1001. Automation Direct ProSense VFS50-10-1001 18 halaman. Vortex flow meter

Halaman Cetak
Display
[UL]
[OL]
[SC1]
[SC2]
[SC]

11 Factory setting

Parameter
SP1
(FLOW)
rP1
(FLOW)
FH1
(FLOW)
FL1
(FLOW)
FEP1
(FLOW)
FrP1
(FLOW)
SP2
(FLOW, TEMP)
rP2
(FLOW, TEMP)
FH2
(FLOW, TEMP)
FL2
(FLOW, TEMP)
FSP2
(TEMP)
FEP2
(FLOW, TEMP)
FrP2
(FLOW, TEMP)
ou1
(FLOW)
ou2
(FLOW, TEMP)
FOU1
(FLOW)
FOU2
(FLOW, TEMP)
Type
Description
Warning Below the detection zone: Measured value lower than
-20 % of the final value of the measuring range.
Warning Detection zone exceeded: Measured value greater than
120 % of the final value of the measuring range.
Warning Switching status LED for OUT1 flashing:
OUT1 short circuit.
Warning Switching status LED for OUT2 flashing:
short circuit OUT2.
Warning Switching status LEDs for OUT1 and OUT2 flashing:
Short circuit in both outputs.
Factory setting
18.5 % *
18.5 % *
38.5 % *
38.5 % *
20 % *
20 % *
100 % *
100 Hz
40 % *
40 % *
0 % *
100 % *
100 Hz
Hno
Hno
OFF
OFF
User setting
17