Gainbridge GT3018 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk GPS Gainbridge GT3018. Gainbridge GT3018 11 halaman. Covert bike tail light tracker
Halaman Cetak
SMS:
*master*123456*+1XXXXXXXXXXX*
(For instance, master controller phone number is +1XXXXXXXXXXX. +1 refers to the country code.
XXXXXXXXXXXX is the cellphone number. Please make sure country code is included, and 0 is not
needed before cell phone number)
You will receive back a text that says: "Master controller change is successful for
+1XXXXXXXXXXX, the new master controller is +1XXXXXXXXXXXX."
6.4 Change the Password
SMS:
*password*654321*
You will receive the following text: "The password change is successful for +1XXXXXXXXXX. The
new password is 654321."
7. Motion Detection Alert
The Master Controller will receive an alert (call or SMS) once the device detects vibration indicating
possible motion.
7.1 Vibration sensitivity
The device you have purchased is equipped with a sensitive Vibration detection system. Since
certain applications are more sensitive to external vibration sources, the sensor has variable
sensitivity settings.
The unit comes from the factory pre-set to #1, on a scale of 1-5, with 1 being the most sensitive. If
you notice you are getting excessive false movement alerts (like when a heavy truck drives by), you
can simply send the following SMS to the unit, and reset the variable:
SMS:
*sensitive*1-5*
1=3seconds continued vibrating
5=15seconds continued vibrating
Default setting is 1 (per the explanation above)
Device Response: "Vibration sensitivity is set to 1-5."
7.2 SMS or CALL Alert Settings
The Alert function(s) can be set accordingly with the following SMS commands. The system default
setting is call alert.
SMS:
*callalert*
The device will alert by calling the master controller
Device Response: "System has entered call alert function."
SMS:
*smsalert*
Alerts sent via SMS to Master Controller
Device Response: "System has entered SMS alert function."
SMS:
*alertoff*
Turns off all alert functions
Device Response: "System has ended alert function."
Note: * By Default, the Alert System automatically initiates a notification to the Master Controller
when the motion sensor is activated after 3 minutes of non-movement, indicating vibration that may
indicate motion.
Call alert will call master controller 2 times when motion is detected. * Moving (motion) alert can
only be turned off by SMS.
(654321 refers to new password)
(where X = 1-5, 1 being the most sensitive, 5 the least)
6 / 11