Gree 13-04686 Panduan Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pendingin Udara Gree 13-04686. Gree 13-04686 20 halaman.

4. Peel off protective backing from track

seal. Apply seal to room side of window

Apply track seal to window

side of track.

track. Center of seal strip should coincide

with the line marked in Step 2. The two

screw holes drilled in Step 3 should be

directly above seal strip in the inner track.

5. Securely attach a siding-protection board

to side of house.

NOTE: Siding-protection board should be

long enough to span 2 wall studs.

Inside wall of

house

Siding-protection

board

Outside edge is 3/16-inch

6. Place platform assembly, with platform

lower than inside.

tab against inside of window track, and

attach it to window jamb. Use appropriate

length screws (Items

Put platform

9-11 in Preparing For Installation).

tab against

inside of track.

7. Adjust platform assembly so that outside

edge is 3/16-inch lower than inside edge, as

shown right. This ensures proper water

drainage from the air conditioner.

8. Level platform assembly from side-to-

side.

Also, make sure window track is level. Use

leveling shims as necessary to ensure unit is

Measure dis-

level from side-to-side.

tance and

subtract

20 5/8 inches.

9. Measure height of window opening from

top of platform assembly as shown right.

Subtract 20-5/8 inches. Mark this measure-

ment on plastic window panel, along the

longer side.

(continued)