Automation Networks Highway Plus ANC-100e Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor Automation Networks Highway Plus ANC-100e. Automation Networks Highway Plus ANC-100e 19 halaman. Ethernet to data adapter
Halaman CetakANC-100e
Ethernet to DH+ Adapter
Network Adapter Configuration
IMPORTANT: Before proceeding, make sure that the unit is connected to your Ethernet network or a
free Ethernet port on your computer.
If you have changed the IP address of the ANC-100e device, please use that address for the following
procedure.
The default IP settings programmed into the device at the factory are:
IP Address:
192.168.0.230
Mask:
255.255.255.0
Default Gateway: 192.168.0.1
It is required to configure your PC's network adapter to use a static IP address the first time the device
is used, in order to access the ANC-100e web configuration interface.
If you happen to be using the same network parameters that match the default configuration of the
device and the default device IP address is not used on your network by any other IP enabled device,
please skip this step.
1. Open Window's Control Panel
2. Click on "Network and Internet"
3. Click on "Network and Sharing Center"
4. Click on "Change adapter settings"
©Automation Networks & Solutions LLC. 2016