DB Drive EUPHORIA EWX6NEO Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Subwoofer DB Drive EUPHORIA EWX6NEO. DB Drive EUPHORIA EWX6NEO 5 halaman. Neodymium subwoofers
Halaman Cetak
PRODUCT DIMENSIONS
A
Frame Diameter
B
Mounting Depth
C
Cutout Diameter
EWX6NEO
A
Frame Diameter
7.14 in / 181.5 mm
B
Mounting Depth
4.22 in / 107.2 mm
C
Cutout Diameter
5.93 in /150.8mm
RECOMMENDED ENCLOSURE
The purpose of the information below is to help you select the most appropriate type of enclosure for your
application. We have selected the two most popular enclosure types and their performance benefits.
Sealed Enclosure (Air-Suspension design): Characteristically simpler to make, sealed enclosures usually are
better at controlling the woofer's excursion and performance at lower frequencies. The added control allows
for higher power handling or use of a bigger amplifier. The secret is to maintain a perfect seal. Using Glues
and sealants at all seams is recommended to prevent leaks and integrity of the enclosure. The size or volume
of the enclosure will directly affect the performance of the woofer. Smaller enclosures generally provide the
desired bump to the frequency response curb and Greater SPL. Larger enclosures will provide a lower but
flatter response for deeper bass. In general, the benefit to the sealed enclosure versus a ported enclosure
is a smaller foot print, simpler build with higher power handling, a more linear flat response, superior sound
quality and extended low frequency output.
Ported Enclosure (Bass-Reflex or Vented): A ported enclosure is simply a sealed enclosure with a port or
vent added to the sealed design for the purpose of tuning the enclosure to higher output at the desired
tuned frequency, typically 3db or higher. Another advantage of a ported enclosure is the reduction of cone
motion for the speaker, thus distortion at higher power levels within the tuned frequency response of the
port. A drawback is that building a ported enclosure is more complex than sealed. Having the wrong port or
vent could result in poor sound, and the potential of damaging a woofer when played too loud or out of the
tuning frequency. Thus we recommend not guessing, please follow the guidelines listed in this manual or go
to a professional. In General, the benefit of a ported enclosure versus a sealed is higher volume output at the
tuned frequency, stronger bass output with lower power input.
Construction: We recommend using ¾" MDF (Medium Density Fiberboard) for the construction of an
enclosure. It is critical for the side walls of the enclosure not to flex due to the pressure generated by the
woofer, bracing might be required. The enclosure sides should be secured together with nails/screwed. We
also recommend the use of glues and sealants to maintain the integrity of the enclosure and eliminate leaks.
A
B
C
EWX8NEO
8.75 in / 222.5 mm
5.06 in / 128.6 mm
7.17 in / 182.3 mm
4
RECOMMENDED ENCLOSURE
Sealed
EWX6NEO
ENCLOSURES
5.93 in
Woofer Cutout
(150.8mm)
4.22 in
Mounting Depth
(107.2 mm)
0.3 cuft
Sealed Box
(8.50 L)
0.42 cuft.
Vented Box
(11.89 L)
Vent Area
2 in round
(12.90 cm2)
Vent Length
13.5 in
(34.29 cm)
38Hz
Tuning
Dynamic Power
500 Watts
Nominal Power
250 Watts
CALCULATING ENCLOSURES
It is difficult to give exact box dimensions that are universal for all cars and trucks. It is for this
reason that you must be able to calculate the space in which you have available in order to achieve
the proper air volume required.
It is recommended to build your enclosure from 3/ 4" thick MDF (medium density fiberboard).
Make sure the enclosure is sealed airtight.
Calculating External Volume
To calculate box volume, measure the outside Width x Height x Depth of
the enclosure.
Example 12" x 14" x 9"=1512 ÷ 1728" Cubic feet
Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inches total by 1728". Example 1512 ÷ 1828=.875 Cubic feet
Calculating Internal Volume
To calculate the internal (net) volume of the above box you must first multiply
the thickness of the wood you are using by Two(2).
Next subtract 1.5 from each of the outside measurements of the box.
Width
12 - 1.5 = 10.5
14 - 1.5 = 12.5
Multiple the new totals
(H x W x D) Example: 10.5 x 12.5 x 7.5 = .5696 Next you must convert cubic
inches into cubic feet. To do this, you must
Example 984.375 ÷ 1728=.5696 cubic feet.
Vented
EWX8NEO
7.17 in
(182.3 mm)
5.06 in
(28.6 mm)
0.5 cuft
(14.15 L)
0.6 cuft.
(16.9 L)
3 in
(19.35 cm2)
24 in
(60.96 cm)
39Hz
600 Watts
300 Watts
Example 3/4" x 2= 1.5"
Height
Depth
9 - 1.5 = 7.5
divide the cubic inch total by 1728".
5