DB Drive G7 8.2 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Subwoofer DB Drive G7 8.2. DB Drive G7 8.2 8 halaman.
Halaman Cetak
DVC WIRING CONFIGURATIONS
You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match
the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or
multiple woofers in these three different wiring configurations will result in different impedance loads.
Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration
below)
Parallel: Is the method of wiring where you wire match 2 speaker terminals with positive to positive
terminal and negative to negative. (Illustration below)
Series/Parallel: This configuration is a combination of both series and parallel. We recommend series
for the terminal and parallel for the leads to amp. (Illustration below).
1 x 2Ω DVC
SUBWOOFER
2Ω
2Ω
•
SERIES
•
1Ω & 2Ω DVC WIRING CONFIGURATIONS
1 x 2Ω DVC
SUBWOOFER
2Ω
2Ω
4Ω
1 x 2Ω DVC
SUBWOOFER
4Ω
•
PARALLEL
1 x 2Ω DVC
SUBWOOFER
2Ω
2Ω
1Ω
2Ω
2Ω
1Ω
•
2 x 1Ω DVC
SUBWOOFERS
1Ω
1Ω
1Ω
1Ω
6
2 x 4Ω DVC
SUBWOOFERS
4Ω
4Ω
4Ω
4Ω
•
SERIES/PARALLEL
2 x 2Ω DVC
SUBWOOFERS
2Ω
2Ω
1Ω
4Ω
•
2Ω
2Ω
2Ω