Activeion Cleaning Solutions ionator EXP Petunjuk Manual - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Produk Perawatan Pribadi Activeion Cleaning Solutions ionator EXP. Activeion Cleaning Solutions ionator EXP 9 halaman.
Halaman Cetak
ionator eXP™ instructions
chaRGe
Connect the charging cord to the back of the ionator EXP™ and plug the charger into any standard outlet (input AC 100~240V 50/60 Hz
0.3A). A red light on your ionator EXP™ will glow to indicate the unit is charging. The red light will turn off when charging is complete. It is not
necessary to run the battery down before recharging.
When charging is complete,
the red indicator light on the
base of the unit will turn off.
Fill
Fill the reservoir with tap water ONLY. Do not add anything to the tap water. When filling, take care to fill directly into the fill hole. To maintain
great results with the ionator EXP™, please rinse the reservoir from time to time (usually once per week) with warm water.
Fill the reservoir with
tap water ONLY.
Do not add
chemicals.
GReen Glow = Go clean
A green glow in the reservoir as you squeeze the trigger means your ionator EXP™ is working as it should, and the water is being ionized to clean
as well as or better than daily-use, general-purpose cleaners. Your ionator EXP™ is ready to clean multiple surfaces: glass, stainless steel, wood,
carpet, ceramic tile and much more.
clean
Wet the surface with ionized water from your ionator EXP™ and wipe the surface dry with a clean cloth.
Spray ionized water from the
ionator EXP™ directly onto the
surface to be cleaned.
Kill GeRms
To kill germs on nonporous hard surfaces follow these steps: Fill your ionator EXP™ with tap water. DO NOT use distilled or purified water.
Clean surfaces with the ionator EXP™. (1) Spray the surface to be treated for 6 seconds at a distance of 3-4 inches (7-10 centimeters) (2) Wipe
the surface dry with a clean cloth. Following this process kills more than 99.9% of harmful bacteria and the Pandemic 2009 H1N1 Influenza A
virus.
A blue light in the head of the
ionator EXP™ indicates it is
generating the power needed
to kill germs.
It is a violation of U.S. federal law to use this product in a manner inconsistent with its labeling.
Red Glow = RechaRGe oR call
A red glow in the reservoir during use indicates one of two things: Either the battery needs to be recharged, or the ionator EXP™ is not properly
ionizing the tap water.
If the battery is charged and the reservoir
still lights red when cleaning, please call
Activeion, toll-free, at 866.950.4667 or
1.763.428.0081 for international calls.
866.950.4667
3172713
CONFORMS TO
UL STD 73
Charging will take approximately
three hours. It is safe to charge
your ionator EXP™ with tap
water in the reservoir.
Avoid splashing on
the unit when filling.
Do not fill while unit
is charging.
*Recharge ONLY with
the supplied charger.
Wipe the surface dry
with a cloth.
6
Spray the surface for 6
seconds. Wipe surface
seconds
dry with clean cloth.
Store your
ionator EXP™
above
40°F (5°C).
CERTIFIED TO CSA STD
C22.2 NO. 68; CAN/CSA-
Csa-C22.2 No. 68-92
1
Do not fill while unit
is charging.
*Recharge ONLY with
the supplied charger.
Do not submerge.
To properly clean, spray
the surface directly with the
inonator EXP™. Do NOT
spray the cloth.
To properly kill germs, spray
the surface directly with the
ionator EXP™. Do NOT
spray the cloth.
The battery and other components of the
ionator EXP™ require proper disposal.
Please contact Activeion with questions.
No Household Trash.
Made in the USA.
©2010 Activeion Cleaning Solutions, LLC
Patents pending, Activeion Cleaning
Solutions, LLC and Tennant Company