89 North PhotoFluor II Series Manual Penggantian - Halaman 5
Jelajahi secara online atau unduh pdf Manual Penggantian untuk Peralatan Pencahayaan 89 North PhotoFluor II Series. 89 North PhotoFluor II Series 8 halaman. Lamp replacement
Halaman Cetak
STEP 1
STEP 2
STEP 3
Rev B
DISCONNECT POWER
Unplug the power cord before attempting to open
the outer casing.
REMOVE EXISTING BULB
Remove the outer top cover by removing the four
screws with a Phillips screwdriver and pulling the
cover up and off. Next, remove the inner lamp
chamber cover by removing the thumbscrew and
sliding the plate off. See Figure 2.
Figure 2: Lamp chamber cover
DISCONNECT
connector). Next, locate the lamp mount and
disengage the metal retaining wire from the tabs.
See Figures 3 & 4. Remove the lamp and dispose of
properly.
Thumbscrew
Lamp chamber
cover
slides off
the lamp power cable (brown
5