Hideki TE 529EL Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Stasiun Cuaca Hideki TE 529EL. Hideki TE 529EL 11 halaman. Weather station hideki te 529el

Halaman Cetak

•

As soon as the radio signal has been received the time will be displayed (hour, minutes and

seconds). The symbol

•

If the search for the radio signal is not successful this symbol will not appear. Instead the symbol

for signal search will be displayed. In this case the time has to be set manually.

•

Press

button for 2 sec., in order to switch off the radio controlled quartz function. The symbol

for radio signal transmission will be deleted. By pressing the

controlled reception will be turned on again.

Note: The radio controlled signal for time (DCF 77) is transmitted from the central atomic clock in

Frankfurt/Main, Germany.

Time and Date Display Modus

The main unit receives and displays together with the time signal the effective date. The MODE is

used to obtain this information.

•

Press 1 x and the time and weekday appears (hour, minutes and weekday).

Press 2 x and the time and weekday for a second time zone appears (hour, minutes and

•

weekday).

•

Press 3 x and the time with seconds of the second time zone appears (hour, minutes and

seconds).

•

Press 4 x and the actual date appears (day and month).

Manual Setting of Date, Time and Temperature

By pressing the MODE button for 2 sec. the value to be changed begins to blink. Use the

reduce and the

button to increase the value. If the values are not numerical, the

will offer other possibilities. By pressing the MODE button the blinking, which indicates the value to be

changed, will move forward.

So the following values may be set:

1. Country (Germany=DE)

2. Select °C/°F

3. Calender Year

4. Month

5. Day

6. Sequence of Date (ay and onth or month and day)

7. Hour Format (12 or 24 hour)

8. Hour

9. Minutes

Note: When setting hours anew, the seconds return to 00.

Setting of the Second Time Zone

The actual time of a second time zone is programmed with the MODE button by calling up the

appropriate display. ZONE will appear in front of the time display.

Press MODE button for 2 sec. until 0:00 starts to blink in the LC display. Set the difference between

the local time and second time zone by using the

in 30 minute increments. The second time zone can differ between – 13 and +15 hours from local time.

Confirm data entered with a short pressing of the MODE button.

will appear in the display as confirmation of radio signal reception.

and

button again for 2 sec. , the radio

buttons, which will advance ore decrease

button to

and

button