AFHCAN Horus 3 Panduan Praktis - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Praktis untuk Kamera Digital AFHCAN Horus 3. AFHCAN Horus 3 4 halaman. Multi-purpose exam camera

Halaman Cetak

AFHCAN

www.afhcan.org

Powering On Device:

1. To Power on press and hold the Power button on the top of the unit If the unit is not charged it can take up to 5

minutes to turn on. When powering on is complete, the Live View screen appears with a set of icons at the top

of the screen.

Reviewing Images:

1. Tap the Display Mode to view photos from the SD memory card.

2. To return to view mode press the OK button.

Photo Mode/Video Modes—These are used for taking pictures and

sharing those photos and videos.

Display Mode— This is used for viewing photos stored on the

SD memory card.

Settings Mode— This is used for setting the date and time as well

as formatting or deleting photos from the memory card.

How to get the Horus 3 into UVC mode for live video conferencing

and store and forward for transferring images --



Make sure the needed lens is attached prior to powering on the scope.



Verify the Horus 3 camera is connected to your device with the supplied USB cable.



Tap the Camera mode icon on the left top of the screen and select the settings option.



Touch the wrench icon to find the UVC settings. Then toggle the UVC to on from off,



Return to the view mode by pressing the OK button on the device.

Cleaning and Maintenance:



Power off the Horus 3 Scope before cleaning it.



Clean the LCD screen using an alcohol swab.



Use soft lens cleaning cloth or tissues for lenses



Otoscope Lens: Clean the exterior of the Otoscope tip with alcohol wipe and apply a new specula for each

patient.



Dermatology Contact Lens: Clean the contact plate with alcohol swab before and after use with each new

patient.

Handy

Guide

Power on Device and Reviewing Images

Device Modes

HG–0329 Horus 3

Multi-Purpose Exam Camera

Photo Mode

Video Mode

Display Mode

Settings