ActiveProducts XE06 Panduan Pemilik - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Cuci Tekanan ActiveProducts XE06. ActiveProducts XE06 10 halaman. 1600 psi electric pressure washer
Halaman CetakASSEMBLY AND OPERATING INSTRUCTIONS
9
Attach garden hose to water supply and
turn water on.
11
Completely unwind power cord and plug the
unit into an outlet.
13
ON
Press the ON Button.
10
OFF
Make sure the ON/OFF switch is on the
OFF position.
12
Depress trigger until there is a steady
stream of water.
CAUTION
Drain unit after each use (for
storage): remove water
connection, turn ON the
machine for a few seconds
and press gun trigger to bleed
remaining water in the pump.
Turn OFF immediately.
9
ASSEMBLY AND OPERATING INSTRUCTIONS
USING THE ACCESSORIES
Adjustable Spray Nozzle
The adjustable spray nozzle can be adjusted from fan to jet. The spray is adjusted from jet
to fan spray by turning the nozzle.
CAUTION
Jet spray adjustment is very aggressive. Do not adjust while spraying.
WORKING WITH DETERGENTS
Working with detergent ensures a quick soaking of the dirt, and allows the high-pressure
water to penetrate and remove the dirt more effectively. Always spray detergent on a dry
surface, do not pre-soak area. Wetting the surface first dilutes the detergent and reduces
its cleaning ability.
To apply detergents you must be operating at low-pressure. This provides a gentle applica-
tion of detergent, with the pressure equivalent to a lowest garden hose. The high-pressure
setting is used for cleaning; you cannot apply detergents when working at high-pressure.
Always test detergent in an inconspicuous area before use.
CAUTION
Only use cleaning detergents recommended for pressure washers.
1
Engage gun safety lock.
2
Set the adjustable wand to the low-
pressure setting by pulling the nozzle out.
The wand must be set in the low-pressure
position to apply detergent.
10