Kintech Engineering BGAN Instalasi & Orientasi Antena - Halaman 4
Jelajahi secara online atau unduh pdf Instalasi & Orientasi Antena untuk Unit Kontrol Kintech Engineering BGAN. Kintech Engineering BGAN 8 halaman.
Juga untuk Kintech Engineering BGAN: Panduan Pengguna (10 halaman)
Halaman CetakBGAN SATELLITE | INSTALLATION & ANTENNA ORIENTATION
13. In the upper part of the STATUS box (indicated as Connection as shown below) check the green bar in order to verify the
Signal Strength. Any value over 50 dB will be suitable for a good coverage (i.e. 56 dB).
14. Exit the BGAN terminal in your web browser and turn off the BGAN modem.
15. The following picture shows the Immarsat satellites and its coverage map.
HOW TO FINE ADJUST THE BGAN ANTENNA
1. Now disconnect the ethernet cable from your PC and plug it back into the Moxa Nport.
2. Power on the BGAN modem.
3. The BGAN LEDs carry out a startup sequence that lasts 25-30 seconds. Wait until the Power LED on the front panel starts
blin-king with the other two LEDs off.
4. With the Power LED blinking, press the Function Button (< 2 seconds, without holding it). If done correctly, the three LEDs
will start blinking at the same time. The modem now enters orientation mode.
For more information please contact [email protected]
or visit our website www.kintech-engineering.com