Dynamic DX-ECU Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Unit Kontrol Dynamic DX-ECU. Dynamic DX-ECU 15 halaman. Environmental control unit

Molex Connector

A maximum of two ECU Modules can be connected into any DX system. These are

nominally labelled ECU1 and ECU2. In order for the SCR to determine which

Module is ECU1 or ECU2, the Molex socket is used.

Supplied with the ECU is a Molex plug which, when fitted into the Molex socket,

will effectively tell the SCR that it is ECU2.

When the DX System is powered up, the ECU(s) is designated an ID (ECU1 or 2

depending whether the Molex plug is inserted) and the relevant LED is lit.

Note :

Care should be taken when looming for the ECU and other DX

modules that wires can not be transposed.

GBK64227 - Issue 3 : August 1998