Gait up Physilog 5 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sensor Keamanan Gait up Physilog 5. Gait up Physilog 5 12 halaman.
Juga untuk Gait up Physilog 5: Panduan Pengguna (17 halaman), Panduan Pengguna (17 halaman)

Halaman Cetak

5.3 How to update Date and Time of the Physilog®5

- Create a new text file on the Desktop of your computer or directly on the Physilog® sensor

(right click, new>text file)

- Leave it empty and rename it to TIME.txt

- Copy-paste the file to the Physilog® if you created it on the Desktop

- The Physilog® date and time are updated to the hour when the file has been created

Create a new text file each time you update the date (TIME.txt file previously created will

update to the date it was created, so in the past), and do not rename the existing TIME.txt.

The TIME.txt file will disappear from Physilog's memory when disconnecting the Physilog®

from the computer, therefore it is normal to not find it the next time you open the Physilog®

on the computer.

5.4 How to update firmware of Physilog®5 with nRF Connect

The firmware is updated via Bluetooth. Therefore install the Android application nRF

Connect for Mobile on a mobile or tablet and follow the steps below:

- Download the latest firmware version from the email to the

Android device

- Open the nRF Connect app and enable all necessary permissions

(Bluetooth and Position)

- Go to Scanner tab and scan for surrounding Physilogs (shortly

push the main button of the Physilog®5 to enter detection mode)

- Select connect of one Physilog®5 sensor in the list

- In the top rigth corner of the app click on the DFU button (on the

right of Disconnect) and select Distribution Packet (ZIP) from

the proposed options

- Get the new firmware file from where it was downloaded (Some

device may only allow to select from Dropbox)

- Wait until the graph in the app has shown that 100% of the

firmware was transferred

- Disconnect the Physilog® by clicking on Disconnect and close the tab of the Physilog®5

- Plug the Physilog® to the computer and update the date and time (see above)