Dynamic Cooking Systems DCS-IVH-36 Petunjuk Perawatan dan Penggunaan Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Perawatan dan Penggunaan Instalasi untuk Kap Ventilasi Dynamic Cooking Systems DCS-IVH-36. Dynamic Cooking Systems DCS-IVH-36 17 halaman. Island vent hood
Juga untuk Dynamic Cooking Systems DCS-IVH-36: Petunjuk Pemasangan Penggunaan & Perawatan (20 halaman)

Halaman Cetak

Ca re And Use

CLEANING THE EXTERIOR STAINLESS STEEL FINISH:

When cool the appliance can be cleaned with hot soapy water, rinsed, dried and buffed to a shine with

a soft, heavy pile cloth. Always try this first, as it is the mildest form of cleaning.

1. Some brands of cleaners are harsher than others. Read their instructions.Try on a small

inconspicuous area first.

2. To avoid marring the surface always rub metal finishes in the direction of the polish lines.The

cleaner will be more effective when used in the direction of the polish lines.

3. Use only clean sponges, soft cloths, paper towels, plastic non-metal soap pads for cleaning or

scouring, use only soap pads with soap still in them, a dry pad can scratch the surface.

4. Be sure to rinse thoroughly and to wipe dry to avoid water marks.

FILTERS AND GREASE TRAYS

Filters should be cleaned frequently in a detergent solution and are dishwasher safe. Empty grease

collection tray(s) regularly.

Unplug the Blower Motor before cleaning Ventilator.

• Remove filters to access blower motor plug.Vacuum blower

to clean.

• Do not immerse in water.

• Do not allow and excessive accumulation of grease.

• Use a mild detergent when cleaning.

• Do not use harsh abrasives, steel wool pads, or abrasive

cloths.

CLEANING THE GREASE TRAY

Remove filter(s) by gently pulling up and out.The grease trays can

easily be reached once the filters are removed. Grease collection

trays are easily accessible at the center beneath the filter. See

illustration below for location.

FILTERS

GREASE TRAY

DCS-IVH-48

Location of grease trays

DCS-IVH-36