Gaius GL-1028-A-3 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Gaius GL-1028-A-3. Gaius GL-1028-A-3 11 halaman.

Be careful while handling the diffuser, the glass cover is fragile and is not attached to the plastic base.

It is therefore necessary to hold the plastic base with one hand and to keep the glass cover in the other.

A detailed diagram of the components is available on the last page.

1. Insert the adaptor's connector into the DC jack input under the base of the diﬀuser.

2. Place the diﬀuser on a ﬂat and stable surface and away from the edge.

3. Remove the diﬀuser's glass cover.

4. Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated (230 ml).

5. Then add a few drops of essential oils (2-5 drops) or home fragrances (3-7 drops) to the water tank.

6. Carefully replace the glass cover on the diﬀuser's base. Be careful when handling, the glass cover is just placed on

the plastic base, it is not attached.

7. Plug the adaptor into the outlet.

You are advised to change frequently the water in the tank and clean the diﬀuser once or twice a week, particularly if you

want to change the fragrance to be diﬀused.

1. Turn the appliance oﬀ and unplug it.

2. Remove the cover and pour the water into the tank. Empty the water in the opposite way to the air outlet, do not

empty the water in the air outlet, this would damage the diffuser.

3. Clean the inside of the diﬀuser with a soft damp cloth and a little water. If needed, use a little white vinegar strongly

diluted. Do not use corrosive detergents. Carefully rub the ceramic disc with a cotton bud being careful about not to

scratch it.

PRECAUTIONS FOR USE

3./6.