Hidromasajes Estilo BR -0502S Instal Arah - Halaman 2

Jelajahi secara online atau unduh pdf Instal Arah untuk Bak Mandi Air Panas Hidromasajes Estilo BR -0502S. Hidromasajes Estilo BR -0502S 3 halaman. Massage bathtub

Installation
1. Adjust the feet-screw to make the bathtub horizontal.
2. Connect the drainpipe to the cloaca.
3. Fix shower head and pillow.
4. Connect to the cool(blue) and hot(red) water pipe.
5. Connect to power source, then fill water to have a test.
Parameter
V o l tage: 2 20V - 2 4 0V
5 0 H z / 6 0 Hz □
Power: 1HPx2
Hydraulic pressure : 0.1~0.2Mpa
Size: 1800x1500x700mm
Operation
1.
Fill water
Turn the cool/hot switch to adjust the water temperature, turn the
shift switch to fill water through shower head or faucet or waterfall.
Stop to fill water when the water level is 10-20mm above the water
jet.
2.
Hydraulic massage
Press the pump switch to start the pump and bubble pump,then there
will be bubble come out from the air bubble jets and turn the air
regulator to adjust the hydraulic power. Push the jet to change the
water spray direction. Press the switch again to turn off the pump.
3.
Shower
Turn the cool/hot water switch to get suitable temperature, then turn
the shift switch to use shower head to take a shower.
4.
Power off
Press the pump switch to turn off the pump, then turn the drain
switch to let out the water,when stop use ,turn off the power source
switch and the water supply switch.
Sketch
900
1800
SIZE:1800X1500X700mm
Sketch
1
2 3 4 5 6 7 8 9
10 11 12 13
drainage
cold water
hot water
1.water pump switch
2.air conditioning
3.tap
4.hot water switch
5.shift switch
14
6.cold water switch
7.shower
8.air conditioning
15
9.water pump switch
10.water inlet
11.big nozzle
12.drainage switch
13.drainage
14.Pillow
15.small nozzle
shower
tap