Dynamic Engineering PCI2PMC Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu PCI Dynamic Engineering PCI2PMC. Dynamic Engineering PCI2PMC 15 halaman. Pci single slot pmc compatible carrier use your pmc in a pc

Halaman Cetak

Product Description

PCI2PMC is part of the PCI and PMC Compatible family of modular I/O components.

The PC2PMC adapts one PMC to one PCI slot. Dynamic Engineering has several

versions of the PCI2PMC including bridged and two slot versions. The PCI2PMC is a

single slot passive design.

Special features:

• Universal PCI 1/2 length card.

LED's are green and steady on when the voltages are active.

• LED1 is PMC Busmode "Present"

• LED2 is 3.3V to PMC

• LED3 is 3.3 from PCI bus.

• LED4 is 3.3 from Regulator

• LED5 is plus 5

• LED6 is plus 12

• LED7 is minus 12

• Jumper selection for onboard 1500mA regulator or PCI 3.3V supply

• 32 or 64 bit operation

•10 ohm series resistors on AD31-0

• Clamping Diodes on critical PCI signals

• Zero delay buffer for PCI clock distribution

• PrPMC clocking options

• Front panel connector access through PCI bracket

• User IO [Pn4] available through 2 cable connectors (DIN IDC and SCSI II compatible)

• Spare pins on SCSI connector can be jumper selected to 5V or ground.

• Matched length IO.

• Cooling cutout for increased airflow to PMC

• Jumper selection on M66EN

• JTAG and Monarch mode control header options

PCI2PMC is a passive design incurring no added delays in connection from the PCI to

the PMC buses. The design incorporates features to prevent the physical length of the

traces from affecting operation. There may be cases where the backplane can't support

all slots with PCI2PMC cards installed.

Our bridged products including PCIBPMC, PCIBPMCET, PCIBPMCX1, and

PCIBPMCX2 can be used in situations where a bridge is desired. Please refer to the

Dynamic Engineering website for more information on these and other products.

Embedded Solutions

Page 5