Dynamic Engineering PCI2PMC Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu PCI Dynamic Engineering PCI2PMC. Dynamic Engineering PCI2PMC 15 halaman. Pci single slot pmc compatible carrier use your pmc in a pc
Halaman CetakNotes:
A) Revision 4 and later boards M66EN is connected to the PMC slot [Jn2-47].
Recent revision 3 boards are reworked to have the equivalent functionality.
B) Shunts are capable of 800 mA. The Shunts on J2,J3 are not fuse protected.
Your circuit must limit total power consumed.
C) Rev 1-4 required –HC option for more than 800 mA of 3.3V from the backplane to
be routed to the PMC. Revision 5 and later have MOSFET switches controlled
by J1 with a 10A rating. The local regulator has been upgraded to 1500 mA.
D) Revision 5 and later boards with the PrPMC option; not installed unless ordered.
Standard configuration is the equivalent of the PCI clock through the PLL to the
PMC.
E) Rev 5 and later boards have power reference for JTAG header.
F) Rev 7 switched to 0603 capacitors and increased quantity
G) Rev 8 has matched length IO for Pn4.
Embedded Solutions
Page 8