Dynamic Engineering PCIe8LXMCX2 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor Dynamic Engineering PCIe8LXMCX2. Dynamic Engineering PCIe8LXMCX2 17 halaman. Pcie 8 lane 2 position xmc compatible carrier, with pmc/scsi rear io connector
Halaman CetakPCIe8LXMCX2 itself, and it is smart system design when it can be achieved.
Construction and Reliability
PCIe8LXMCX2 is constructed out of 0.062 inch thick high temp RoHS compliant FR4
material. Cooling cutouts are designed into the product for improved air flow to the
XMC sites. The components on the PCIe8LXMCX2 are tied into the internal power
planes to spread the dissipated heat out over a larger area. This is an effective cooling
technique in the situation where a large portion of the board has little or no power
dissipation.
A fan option is available for high thermal load XMC's or for a chassis with a lack of air
circulation.
Surface mounted components are used. The connectors are SMT for the XMC bus and
through hole for the IO.
The XMC Module connectors are keyed and shrouded with Gold plated pins on both
plugs and receptacles. They are rated at 1 Amp per pin, 50 insertion cycles. These
connectors make consistent, correct insertion easy and reliable. Please be aware the
connectors are somewhat delicate compared to PMC and other mezzanine connector
types.
The XMC Module is secured against the carrier with the XMC connectors. It is
recommended, for enhanced security against vibration, that the XMC mounting screws
are installed. The screws are supplied with the XMC from the OEM. Dynamic
Engineering has screws, standoffs, blank bezels and other XMC hardware available at a
reasonable cost if your XMC was not shipped with some of the required attachment
hardware or if it has been misplaced.
Thermal Considerations
If the installed XMC has a large heat dissipation; forced air cooling is recommended.
The zero slot Fan option can provide plenty of cooling power should your XMC require
it.
Embedded Solutions
Page 13