Automotive Tazer JL Mini Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Diagnostik Automotive Tazer JL Mini. Automotive Tazer JL Mini 14 halaman. For jeep wrangler jl & gladiator jt 2018-2020

Halaman Cetak

a steering wheel button combo to hold

the vehicle still, especially helpful when

off-road

• Winch Mode – raise idle RPM to user-

selected value between 1250 and

2000 RPM with a button press

• Button Mapping – use cruise up, down

and right buttons as quick-access to

some of Tazer JL Mini's functions

cruise control is off

• Display DTCs – display Diagnostic

Trouble Codes to see why the Check

Installation is a matter of unplugging the

SGW module above the OBD2 diagnostic

connector and plugging the Tazer JL Mini

in its place. Simply locate the SGW and

unplug its two connectors by pressing

the tab with your index finger and gently

pulling straight down on the wires. Plug

those two connectors into the Tazer JL

Mini.

Engine light may be on.

• Clear CELs – reset check engine light

and DTC codes

• 0 to 30 and 0 to 60 Timers – display

0-30 or 0-60 timers on EVIC

• display Boost/Vacuum readout on the

EVIC

when

Installation

• The Tazer JL Mini is intended to be left

plugged in, as many of its features (Live

Functions) only work when installed.

• The Tazer JL Mini should be Unmarried

and removed before dealer service.

• The Tazer JL Mini will go to sleep 30

seconds after the Jeep shuts down.

• It does not need to be plugged in

for any of the features in the Vehicle

Settings to remain operational.