Hidrotermal ARS-12.5 Panduan Instalasi dan Pemeliharaan - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pemeliharaan untuk Dispenser Air Hidrotermal ARS-12.5. Hidrotermal ARS-12.5 12 halaman. Automatic residential softener
Halaman Cetak※Parameter Setting
Meter Type Softener Valve
Parameter setting
Time of Day
Regeneration Time
Water Hardness
Item
Time of Day
Regeneration Time
Water Hardness
Items
When
the
1.Press "
as the figure LR1 shows. The item of "Set Time of Day" will be
selected by system automatically.
Time of Day
2. Then press the "
the figure LR2; the hour value "12" flash, through"
adjust the minute value.
3.Then press "
"
" or"
4.Lastly, press"
1.Press "
as the figure LR1 shows.
2. Press "
then press"
Regeneration
LR3; hour value"02" flash, through "
Time
value.
3.Then press "
"
" or"
4.Lastly, press"
1.Press "
as the figure LR1 shows.
2. Press "
Water
then press"
Hardness
LR4; hardness value"150" flash, through "
the hardness value.
3.Lastly, press"
Illustration: After setting the water hardness, the display screen will show the total water
treatment capacity or remaining water. If you think the water treatment capacity is too low to meet
your demand, you can adjust the capacity by setting the water hardness. Under the condition of
not affecting the outlet water quality, lowering the water hardness value can increase the water
treatment capacity.
Parameter set Arrange
00:00-23:59
00:00-23:59
50-999mg/L
Process Steps
light on, press and hold "
light off.
" and enter into the interface of "Set Softener Para.",
", and the setting interface will display as
" again, the minute value"30 " flash, through
" to adjust the minute value.
"and hear a sound "Di", then finish adjustment.
" and enter into the interface of "Set Softener Para.",
" and select the item of " Set Regeneration Time";
", the setting interface will display as the figure
" again, the minute value"30" flash, through
" to adjust the minute value.
"and hear a sound "Di", then finish adjustment.
" and enter into the interface of "Set Softener Para.",
"twice and select the item of " Set Water Hardness";
", the setting interface will display as the figure
"and hear a sound "Di", then finish adjustment.
Time of Day
Regeneration Time
Water Hardness
150mg/l
Factory Default
Current time
02:00
150mg/L
"and"
"for 5 seconds until
" or "
"or"
" to adjust the hour
" or "
" to adjust
5
Actual Value
Symbol
Set Softener Para.>> Set
Time of Day
Set Regen. Time Set
Water Hardness
LR1
" to
Set Time of Day
LR2
Set Softener Para.>Set
Time of Day
Set Regen. Time Set
>>Water Hardness
LR1
Set Regen. Time
02:00
Set Softener Para.>Set
Time of Day
Set Regen. Time Set
>>Water Hardness
LR1
Set Water Hardness
LR4