Aire WELKIN Petunjuk Manual - Halaman 12

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kipas angin Aire WELKIN. Aire WELKIN 17 halaman.

OPERATING THE REMOTE CONTROL / WALL CONTROL

Remote Control only: Install a A23 12 volt battery (included). To prevent damage to transmitter remove the battery if not

used for long periods of time.

Your DC brushless motor is equipped with a self learning frequency function remote control.

Restore power to ceiling fan and test the transmitter as below for proper operation:

A. 1, 2, 3, 4, 5 and 6 button:

These six buttons are used to set the fan speed as follows:

1 = minimum speed

2 = low speed

3 = medium low speed

4 = medium speed

5 = medium high speed

6 = high speed

Reverse button:

This button is used to change the direction of the rotation of the blades; forward for warm weather or reverse for cool

weather.

button:

This button turns the power Off to the Fan.

Button:

These buttons turn the light ON or OFF and also control the brightness settings of the light. The following instructions

apply to ceiling fans that feature a DOWN light.

(

button) only or ceiling fans that feature an UP light (

independent of each other;

Press and release the button for the desired light to turn the light ON or OFF. Press and hold the button to set the desired

light brightness. The light will cycle between bright and dim settings as long as the button is pressed. The light key has

an automatic auto-resume feature that allows the light to remain at the same brightness as the last time it was turned

off.

button) and a DOWN light (

button) that are controlled