8level IPEB-2MP-VF-1 Panduan Instalasi Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Kamera Keamanan 8level IPEB-2MP-VF-1. 8level IPEB-2MP-VF-1 4 halaman.
Halaman Cetak
QUICK INSTALLATION GUIDE FOR IP CAMERA
IP Camera
IPEB-2MP-VF-1
Thank you for using our product. Please read this manual carefully before using it.
The manual applies to 8level IP cameras
WARNING!
The manufacturer reserves the right to change the parameters of the devices and the method of
operation without prior notice. Due to continuous modifications and improvements to the firmware,
some of the functions described in the following instructions may be slightly different in reality. The
author reserves the right to make changes to all or part of the information contained in this manual
without prior notice.
COPYRIGHT & TRADEMARKS
We reserve the right to change the product specification without notification.
registered trademark of 8level. No part of the manual may be reproduced, translated or processed in
any other form without permission from 8level NEXT LEVEL IN NETWORKING. All rights reserved.
Copyright © 2011 8level.
CE DECLARATION OF CONFORMITY
The product fulfills the following requirements according to:
EMC Directive 2014/30/UE
SAFETY NOTICE
Do not use this product near water (not applies to IP66 products)
and don't put into water. Do not place heavy objects on the casing.
RECYCLING NOTICE
The symbol of the crossed-out wheeled bin on this product means that it is forbidden to place
the equipment waste together with other waste (under penalty of fine). Detailed information
about recycling of the product can be obtained at local authorities, local waste treatment
plants or local distributors. Forwarding the equipment waste to recycling or recovery points
helps to avoid the negative influence of the harmful components present in the equipment on the
environment and human health; in this scope the primary role is played by each household.
SPECIFICATION
EN
Camera
Image Sensor
1/2.9" SONY Low Illumination CMOS Sensor
Main processor
HI3516C
Resolution
2MP 1080P
Effective Pixels
1985(H)*1105(V)
Compression
H.264/H.264+/H.265/H.265+/JPEG/AVI /MJPEG
PAL/NTSC
TV System
Auto: PAL 1/25-1/10000Sec; NTSC 1/25-1/10000Sec
Electronic Shutter Time
≥52dB
S/N Ratio
Progressive
Scanning System
Network
Video Output
Lens
2.8 - 12mm
Focal Length
manual control
Focus Control
varifocal
Lens Type
3MP
Pixels
Night Vision
42 x 4PCS
Infrared LED
40M
Infrared Distance
Under 10 Lux By CDS
IR Status
IR Power On
CDS Auto Control
Network
Ethernet
RJ-45 (10/100Base-T)
Protocol
TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,NTP,SMTP
ONVIF
Support ONVIF 2.4
P2P
YES, Support QR Code
POE
Support IEEE 802.3af
WiFi
NO
Video Delay
0.3S (Within the Lan)
Main Stream 1
1920*1080@30fps
Main Stream 2
/
Main Stream 3
/
Sub Stream 1
720*480@30fps
Sub Stream 2
/
Sub Stream 3
/
Tri Stream
352*288@30fps
IE Brower
IE8-11, Google Chrome, Firefox, Safari, Mac Safari
Smart Phone
iPhone, iPad, Android, Android Pad
Camera Features
Day/Night
Color/ B&W (IR-CUT )
Image Config
Saturation/Brightness/Contrast /Sharpness, Mirror, 3D NR , White Balance,
FLK(Flicker Control)
Corridor Pattern
/
ROI
Support
Defog Mode
Support
is a
BLC
Support
WDR
Support
Motion Detection
Support
Privacy Masking
3 Rectangular Zone
Recording Mode
NVR/NAS/CMS/Web
Language
Chinese Simplified, Chinese Traditional, English, Bulgarian, Polish, Farsi,
German, Russian, French, Korean, Portuguese, Japanese, Turkish, Spanish,
Hebrew, Italian,Nederlands
Interface
Audio
Optional
Alarm
/
SD Card Slot
YES
RS485
/
General
Metal , IP66
Housing
YES
Anti-cut Bracket
YES
IR Cut Filter
-20°C ~ +60°C RH95% Max
Operation Temperature
-20°C ~ +60°C RH95% Max
Storage Temperature
DC12V±10%, 1000mA
Power Source
220(W) x 80(H) x 80(D)mm
Dimension
1400g
Weight
CONNECTING THE CAMERA TO THE NETWORK
To view the image from the IP camera over the LAN, use a PC working in the same subnet as the
camera (one address pool). Dedicated software used to search for cameras in the network and to
change its settings is the IP Search Tool (enclosed on CD). You can also use a web browser, because the
network camera has a built-in user interface through the browser.
The default IP address of the camera under which the camera is available is: http://192.168.1.168.
Default login and password: admin / admin
PC
WIFI
Router
NVR
Mouse
Diagram of connecting an IP camera using a PoE switch or a switch built into the Router.
DETECT THE CAMERA IN THE NETWORK AND CHANGE ITS IP ADDRESS
To access the IP camera, you need to know its IP address. This can be done using the IP Search Tool,
which will automatically find the device in the local LAN and display information about its current IP
address.
Select the device from the displayed list and change its IP address and subnet mask so that they are in
the same subnet as the PC.
3G
IPC
Switch with POE
IPC with POE