Autonet Mobile ANMASPLS-03 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Nirkabel Autonet Mobile ANMASPLS-03. Autonet Mobile ANMASPLS-03 16 halaman. In-car router
Halaman Cetak
Using your Autonet Mobile In-Car Router
Power up the Autonet Mobile In-Car Router. In most installations this is
done by simply turning your car ignition on.
If the unit is in a visible location, you will notice that the blue status light
on top of the In-Car Router will begin to blink. Once this light remains
constantly on, your network has been connected and is ready for use.
Connect your computer to the wireless network that contains the
name "autonet".
Open your web browser and connect to any website. The Autonet
Mobile In-Car Router login page will appear.
After agreeing to the "Safety Policy" and "Terms and Conditions Policy",
click on the Login button to access the Internet.
Happy Surfing!
Autonet Mobile must be limited to passenger use only while the vehicle is in motion.
2
Configuring the In-Car Router
It is highly recommended that the user enable WEP security and
change the default password on the Autonet Mobile In-Car Router.
Configuring the Wi-Fi interface on your In-Car Router
Locating the unit's serial number
The unit's serial number is located in several locations for your con-
venience. It is a ten digit hexadecimal number located in three places.
It is located:
• on the back of the In-Car Router
• on the side of the In-Car Router where the antennas attach
• on the front of this users manual
• on the front of the Quick Start guide.
If you have trouble locating the serial number of the router please call our
customer support line at 1-800-977-2107 for assistance.
Open a web browser and go to the URL:
http://www. autonetrouter.com/admin
Login as username "autonet" and use the unit's serial number as the
password. (i.e. 0024C76258 ) and click on the "Login" button.
3