DBI SALA Saflok Panduan Instruksi Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instruksi Pengguna untuk Sensor Keamanan DBI SALA Saflok. DBI SALA Saflok 14 halaman. Pole anchor system
3.4
INSTALLATION - ANCHORING THE VERTICAL LIFELINE ROPE: Once the Anchor Tube is correctly
secured on the Wood Pole, the Vertical Lifeline Rope should be anchored at the top or bottom of the pole:
To anchor the Vertical Lifeline Rope at the top of the Wood Pole with the Anchor Tube:
Step 1.
Secure the provided Carabiner to the Eye Splice on the Vertical Lifeline Rope.
Step 2.
Pass the Plain End of the Vertical Lifeline Rope through the Carabiner.
Step 3.
Grasp the Plain End of the Lifeline and pull the Vertical Lifeline Rope through the Anchor Tube until
the Eye Splice and Carabiner are snug against the Anchor Tube and Pole Top anchorage (Figure 12
& Figure 13).
To anchor the Vertical Lifeline Rope at the bottom of the Wood Pole with the Chain Tensioner:
Step 1.
Hold the Chain Tensioner against the Wood Pole and wrap the free end of the chain around the Wood
Pole. Feed the excess chain through the slot in the Chain Retainer and hook a link on the Button Head
Screw Pin protruding from the Retainer. Turn the Hand Wheel to tighten the chain. (Figure 14).
Step 2.
Insert the Endless Loop Sling midway through the Eye Splice on the Vertical Lifeline Rope so a
loop protrudes from each side of the Eye Splice (Figure 15).
Step 3.
Insert the Carabiner through the Shackle. Slide the two loops of the Endless Loop Sling over the
Carabiner and then lock the Carabiner to secure the Vertical Lifeline Rope to the Chain Tensioner.
(Figure 16).
WARNING: Failure to maintain a minimum of eight chain links between the Adjustment Housing
and Carabiner connecting the Vertical Lifeline Rope to the Chain Tensioner may result in the lifeline
pulling the chain link off the Screw Pin on the Chain Retainer, causing serious injury or death.
Figure 12
Figure 15
Figure 13
6
Figure 14
Figure 16