DBK Typhoon EC60 Series Petunjuk Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Pemanas DBK Typhoon EC60 Series. DBK Typhoon EC60 Series 2 halaman.

Halaman Cetak

• Not for use in wet, corrosive or aggressive environments.

• PTC heaters are not suitable for series connection.

• Provide a means of disconnection of all poles from power supply.

• Ensure that the unit and its connection wires are secured and

cannot move.

• PTC heaters have a brief, yet high inrush current. This must

be taken into account in dimensioning the back-up fuse.

• A time delay 'T' fuse may be used to avoid false tripping due

to cold starting.

Connection

Follow marking on heater

Mounting 安装方法

1. Hang up at the top

1. 把产品背面的卡扣

2. Lock into place at the bottom

2. 按入导轨下端边缘

Suggested fuse ratings 建议的保险丝额定值

100-120VAC/

220-240VAC

operation

操作

Warranty 声明

The technical data specified herein have been determined under laboratory conditions and in compliance with generally approved

test regulations, in particular DIN standards. Technical characteristics can only be warranted to this extent.The testing with regard to

the qualification and suitability for the client's intended application or the use under service conditions shall be the client's own duty. We

refuse to grant any warranty with regard thereto. Subject to change without notice.

所有列明的技术参数是在实验室的条件下根据标准实验的方法(例如DIN标准)经过实验而获得。

只有在以上的情况下，技术参数才是有效的。客户如有对特殊应用或者使用环境的需要，

应自行进行实验验证。我方无法对任何客户的实验结果负责。内容如有更改，恕不另行通知。

Marking 标示

Version I093_I094-Manual

Demounting 拆卸方法

1. Pull downwards

1. 适度地从顶部压下产品

2. Demount in a slanted manner

2. 把产品下端拉出安装导轨

Heater Power

加熱器電源

200W/250W

300W/400W

500W

600 W

800 W

•不适合在潮湿，腐蚀性或侵蚀性的环境中使用。

•PTC加热器不适合串联连接。

•必须提供所有极点电源断开的装置

•本机和连接线必须紧固及不能移动。。

•PTC加热器有一个短暂的，但高的启动电流。在后备保

险丝参数选定上必须考虑到这点。

•慢熔型"T"保险丝可用于防止冷起动的误跳闸。

连接

關注加熱器上的標記

Suggested fuse rating (Time delay)

建议保险丝额定值（延时）

Screw Mounting 螺絲安裝

4×M4 Hole for Mounting

EC60/EC80 version only.

4×M5

140

X-flow version only.

6.3A

10A