DBK Drymatic Boost Bar FGPH102 Buku Petunjuk - Halaman 12
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengering DBK Drymatic Boost Bar FGPH102. DBK Drymatic Boost Bar FGPH102 18 halaman. Adaptable heat drying system
Halaman Cetak3. Power up the machines
Plug the air mover and the Drymatic Boost into an appropriately rated power outlet. Switch the air mover on first then use the
red power switch next to the cord to power up the Drymatic Boost Bar. It is good practice to switch on the air mover first but
not essential.
4. Set the desired temperature and start the machine
The main screen on the Drymatic Boost control panel can be used to operate the machine (Start/Stop), view the current
operating conditions and graphed date. The settings button on the bottom right of the display allows the user to set the
maximum temperature limit, maximum current limiter, change the language and reset the unit ready for the next job:
Drymatic Boost Bar has five control buttons along the bottom of the screen, Play, Stop, Graphical Data, Pin Lock and Settings.
The top ribbon shows the machine status, in any situation where the machine is stopped the play button will restart it from
where it previously left off. Similarly the stop button will put the machine on hold without the need to power it down. In order
to correctly understand how the reset button functions please see 'About the Memory' below. The settings button on the
bottom right of the display takes the user to a new screen and allows them to set the maximum temperature, maximum cur-
rent limit, reset the device and change the language and units. This settings screen and description of each function is shown
11