DBK Drymatic Boost Bar FGPH103 Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengering DBK Drymatic Boost Bar FGPH103. DBK Drymatic Boost Bar FGPH103 18 halaman. Adaptable heat drying system

Halaman Cetak

Model Identification:

The model number and serial number on your machine can be used to identify your products type and more detailed power
ratings from the specification table. This serial number can be found on the sticker above the handle on your machine.

Technical Specification

Model
Power Input
Power Draw
Fixed Power Cord Length
Approvals
Electrical Protection Class
Ingress Protection (EN60529)
Storage Temperature
Ambient Operating Temperature
Power Factor
Internal Electronic Components
Control System
Display
Max Air Temperature at Outlet
Duct Size
Housing
Dimensions
Weight
*Max temperature Drymatic Boost can be used in, it can then maintain this temperature of 50°C (122°F) if needed.
**Depending on airflow and mode selected. Maximum air off will be found when on the highest temperature setting with
the lowest recommended operational airflow 1100m³/Hr (650 cfm) and restrictions (such as a small mat).
Standard Models
(DBBSXXXXXXXX)
230VAC (50Hz)
2.2kW @ 20°C
3.95m (13')
CE
I
IP20
-20° to 50°C (-4° to 122°F)
-10° to 50°C (14° to 122°F)*
1
3.3/5VDC
Electronic
4.3" LCD Touch Screen
50°C (°122F)**
470x80mm (19x3")
Polyethylene
689 x 300 x 201mm (27 x 12 x 8)
7.6KG (16.8lbs)
15
Model Number
Serial Number:
Heater Power:
Plug Type:
S = 230V Standard
1 = UK
2 = EU
L = 230V 10A Limited
3 = Australia
A = 120V Standard
4 = USA (NEMA 5-15)
5 = USA (NEMA 6-15)
10A Limited Models
(DBBLXXXXXXXX)
230VAC (50Hz)
1.8kW @ 20°C
3.95m (13')
CE (Aus/NZ)
Unique 4 digit
identification
number
Language:
1 = English
2 = German
3 = Spanish
4 = Dual (Eng/French)
5 = Scandinavian