DBK Drymatic Boost Bar FGPH110 Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengering DBK Drymatic Boost Bar FGPH110. DBK Drymatic Boost Bar FGPH110 18 halaman. Adaptable heat drying system

Halaman Cetak

HANDLE WITH CARE!

RISK OF ELECTRIC SHOCK!

It is recommended to run the unit on a 230V or 120V supply circuit protected by a



Ground Fault Circuit Interrupter (GFCI) or a RCD. It is also recommended to regularly PAT

(Portable Appliance Test) the machine. Only replace fuse with a 15A, 250/500V ceramic

type as marked on the unit.



In order to avoid overheating, do not cover the entire unit. Ensure that when mats

deflate they don't cover any equipment/sockets causing a hazard.

When replacing the plug fuse in UK models the replacement fuse must be rated 13A.



Do not use in the immediate vicinity of a bath, shower or swimming pool. Avoid standing



water or locations where water can run or drip on to the unit.

Keep away from open flames and heat sources or where vapors from gasoline, solvents,



thinners or any other flammable materials may be present.



Do not block either outlet/inlets. This could cause the unit to overheat and limit airflow.

For commercial use only, not for use on building sites.



Do not dispose of in municipal solid waste.



Stacking is for storage purposes only, do not use units when stacked or stack other



equipment on top.

In order to avoid overheating, do not cover the heater.



IMPORTANT SAFETY INFORMATION:

KEEP AWAY FROM CHILDREN!

RISK OF BURNS!