8x8 Inc DV326 Panduan Instalasi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Telepon 8x8 Inc DV326. 8x8 Inc DV326 8 halaman.

Congratulations on becoming an 8x8 Virtual Office Subscriber!

You will need to configure your new hosted PBX and activate your extensions. Below is a step-by-step overview of this

process, alternatively call a Technical Installation Lead (TIL) at 1.866.879.8647 to assist you with set-up.

Pick out a calling plan and sign up

Order your 8x8 VideoPhone

Activate your service

And begin enjoying the power of video calls!

8x8 equipment is shipped to you with a default configuration that allows it to be automatically configured with the required

network settings using a protocol called DHCP. (Note: As with any computer or network device, not every environment is the

same and may require procedures that differ from the default procedures.)

The standard installation procedure assumes:

•

You have a high-speed Internet connection (cable/DSL/other)

•

You have a home router or gateway to share your Internet connection

•

You have DHCP running on your network (most home routers do this, static IP addresses require manual configuration

of settings)

1. Install your 8x8 VideoPhone

Plug the VideoPhone into your network using a standard Ethernet cable (included)

Plug in the power supply (included)

Turn on your VideoPhone

After completing step 1, you are ready to activate your 8x8 account. You will need a 10-digit activation code which is emailed

to you along with the shipping confirmation information.

Pick up your telephone handset and dial any phone number

Follow the voice instructions and enter your 10-digit code

If you have entered a valid code, your account will be activated and your 8x8 phone number will be read back to you.

This number can also be found on your account web page.

3 |