ADENDORFF MAC AFRIC SDRILC-007 Petunjuk Pengoperasian Asli - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian Asli untuk Alat Listrik ADENDORFF MAC AFRIC SDRILC-007. ADENDORFF MAC AFRIC SDRILC-007 9 halaman. Cordless brushless driver
Halaman Cetak
GENERAL POWER TOOL SAFETY WARNINGS
(For All Power Tools)
WARNING! Read and understand all instructions.
instructions listed below may result in electric shock, fire and/or serious personal
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never modify the plug in anyway. Do not use any
adapter plugs with earthed (grounded) power tools.
will reduce risk of electric shock.
5. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
There is an increased risk o electric shock if your body is earthed or
refrigerators.
grounded.
6. Do not expose power tools to rain or wet conditions.
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
increase the risk of electric shock.
8. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
cord suitable for outdoor use reduces the risk of electric shock.
Failure to follow all
Distractions can cause
Unmodified plugs and matching outlets
Water entering a power tool will
Damaged or entangled cords
Use of a
9. If operating a power in a damp location is unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
NOTE: The term "residual current device (RCD)" may be replaced by the term "ground fault
circuit interrupter (GFCI)" or "earth leakage circuit breaker (ELCB)".
Personal Safety
10. Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
moment of inattention while operating power tools may result in serious personal injury.
11. Use personal protective equipment. Always wear eye protection.
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
12. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and /or battery pack, picking up or carrying the tool.
your finger on the switch or energising power tools that have the switch on invites accidents.
13. Remove any adjusting key or wrench before turning the tool on.
to a rotating part of the power tool may result in personal injury.
14. Do not overreach. Keep proper footing and balance at all times.
power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves
Loose clothes, jewellery or long hair can be caught in moving parts.
away from moving parts.
16. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
Power Tool Use and Care
17. Do not force the power tool. Use the correct power tool for your application.
power tool will do the job better and safer at the rate for which it was designed.
18. Do not use tool if switch does not turn it on or off.
with the switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Protective equipment
Carrying power tools with
A wrench or a key left attached
This enables better control of the
Use of dust collection can reduce dust-related hazards.
The correct
Any power tool that cannot be controlled
Such
A