Agriweld TRANSPORT BOX Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pertanian Agriweld TRANSPORT BOX. Agriweld TRANSPORT BOX 19 halaman. For john deere 8rx tombstone

Halaman Cetak

To connect your amber LED side marker lights, fitted as standard, you will need to wire them up to a

relevant 12-24 V electrical plug, suitable for your tractors electrical supply.

If ordered as an extra option, the amber flashing LED side marker lights are set to pattern PA1 before

delivery. If you wish to change this, you will need to work your way down the list of patterns

following the instructions below before fitting the plug and connecting to the tractor.

1. Using the

GREY

flashing pattern.

2. Connect the

BROWN

3. Connect the BLACK wire to Earth (-NEGATIVE) on the battery.

4. Touch the

GREY

sequence.

5. Keep touching the

6. When happy you can fit your 12-24V plug using only the

BLACK Earth (-NEGATIVE) wire.

7. Cut excess

GREY

contact.

STANDARD FIXED AMBER LED SIDE MARKER LIGHTS

BLUE

WIRE = EARTH (NEGATIVE -)

BROWN

WIRE = LIVE (POSITIVE +)

AMBER LED3DV FLASHING MARKER LIGHTS:

wire to make the change you will need a 12V battery on hand to alter the

wire to Live (+POSITIVE) on the battery.

wire once to Earth (-NEGATIVE) which will produce the next pattern in the

GREY

wire in this way until the desired pattern is achieved.

and

YELLOW/GREEN

wires down to within the sheath to prevent further

BROWN

LIVE (+POSITIVE) wire and