Agriweld Basic Quickshift Panduan Operator - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Operator untuk Aksesori Traktor Agriweld Basic Quickshift. Agriweld Basic Quickshift 18 halaman.

STORAGE AND SAFETY WHEN NOT IN USE

Always detach any attachments from the Quickshift when you have finishing using

them.

The Quickshift will stand on its own when not mounted or in use, unless forced over by

external sources. We advise the Quickshift and its attachments be stored away in an

area clear from obstruction without causing hazard to other vehicles, damage to

property or injury to individuals and by ensuring that the storage area is easily

accessible for next use.

If you need to keep the Quickshift mounted to the forklift/loader in between use, it is

important to ensure the Quickshift is lowered to ground level, the vehicle has the hand

brake/equivalent secured, the loader engine is turned off and vehicle is locked.

IMPORTANT MAINTENANCE

It is important to check the main lifting hook, stabilising plates, drawbar clevis and pins

for wear and ensure that none show significant signs of wear or damage.

Before use, always check round the QUICKSHIFT to ensure no damage has occurred

and that the machine appears safe to use.

Keep the QUICKSHIFT clean at all times to ensure easy inspection.

Ensure that the forklift or loader is in full working order and that the QUICKSHIFT is

attached to the forklift or loader correctly before starting work.

Never use the Quickshift and any attachments if any parts/pins are missing.

Routine maintenance and safety checks of the Quickshift does not require the operator

to climb/stand on the machine at any time.

Do not overload the forklift and Quickshift, refer to capacity on page 10 for details. Only

use the Quickshift for its intended purpose.

The Quickshift is subject to L.O.L.E.R inspections annually.