909 10CSMS Buku Petunjuk - Halaman 19
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Melihat 909 10CSMS. 909 10CSMS 20 halaman. 15 amp 10" 254mm single bevel laser guided slide miter saw
Halaman CetakMaintenance
WARNING.
Always ensure that the tool is switched off and
the plug is removed from the power point before making any
adjustments or maintenance procedures.
•
Any damage to this tool should be repaired and carefully
inspected before use, by qualified repair personnel.
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
•
Global Power Brands will not be responsible for any
damage or injury caused by unauthorized repair or
mishandling of the tool.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer's agent, or an
authorised service centre in order to avoid a safety hazard.
Cleaning
1. Keep the tool's air vents unclogged and clean at all times.
2. Remove dust and dirt regularly. Cleaning is best done
with a soft brush or a rag.
3. Re-lubricate all moving parts at regular intervals.
4. Never use caustic agents to clean plastic parts.
CAUTION.
Do not use cleaning agents to clean the
plastic parts of the saw. A mild detergent on a damp cloth
is recommended.
General inspection
Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
19