Dynapac 368678 Petunjuk Pengoperasian dan Katalog Suku Cadang - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Katalog Suku Cadang untuk Alat Listrik Dynapac 368678. Dynapac 368678 7 halaman. Concrete equipment power floats

Halaman Cetak

TECHNICAL DATA

Operating weight Kg-(lb)

Working Width mm-(in)

Blade speed (rpm)

Number of blades

2 Smoothing disks

Overlapping

POWER UNIT

Make

Model

Rated power KW-(hp)

At (rpm)

Gasoline tank capacity l-(gal)

Water tank capacity

Consumption l/h-(gph)

Noise level measured in air at 1m from the

power floats dB(A), according to ISO 6081.

DIMENSIONS

L x w x h mm (in)

EQUIPMENT

STANDARD

Single pitch control system

Electric retardant spray system

Hour meter

Set of 8 blades

3 Halogen lights

Lifting hooks

OPTIONS

Set of 2 smoothing disks

Transport trolley

OPERATING INSTRUCTIONS

BEFORE STARTING

Check engine oil level.

Make sure that all blades are at the same angle. If necessary adjust the blade angle.

Make sure that the safety switch works properly.

STARTING

ALWAYS HAVE THE THROTTLE PEDAL AT IDLE WHEN STARTING ENGINE.

Take place on the seat. If the operator is not in place, because of the safety switch, the engine will never start.

Pull the choke lever. Only if the engine is cold.

Turn the ignition switch key "ON" in order to start engine.

After the engine starts push the choke lever and let the engine warm up for two or three minutes at idle speed.

Apply throttle pedal slowly. Blades will start to turn. Continue applying throttle until desired speed is obtained.

BG70 Europe

P/N 368678

300-(551)

1830-(72)

70 to 160

2x4

yes

Honda

GX 620

15-(20)

3600

14-(3)

15 – (3.2)

1,5 – (0.32)

1016x1930x1315 – (40x76x52)

BG70 USA

P/N 368942