dbx 1074 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer dbx 1074. dbx 1074 16 halaman. Quad noise gat
Juga untuk dbx 1074: Panduan Pengguna (16 halaman)

Halaman Cetak

1074

Section 1

Getting Started

Monitor - On/Off

When the Monitor switch is engaged, it allows you to monitor the filter control (when the Filter switch

is engaged) and/or the key input (when the Key switch is engaged). Once adjustments have been made,

switch the Monitor switch back out for normal operation.

Stereo Couple Switch

The Stereo Couple switch is used to select either Stereo or Dual Mono modes on the 1074. To couple

channels as stereo pairs, press the Stereo Couple switch between each pair. When this procedure is

performed, the odd-numbered channel becomes the master, and the even-numbered channel, becomes

the slave. The slave channel's controls, switches, and LEDs will be disabled, and control for both

channels of the pair is controlled via the master channel's controls.

With the Stereo Couple switch out, each channel of the pair (1&2) or (3&4) function as two separate

mono gates. Each channel has its own independent controls.

Stereo Couple LED

The Stereo Couple LED indicates that the two channels are stereo-coupled.

Threshold Control

Adjusting this control sets the level at which the gate will open and allow the signal at the input to

pass through to the output. Turning the knob fully counter clockwise (to off) allows the gate to pass

all signals unattenuated, effectively bypassing the gate. Turning the knob fully clockwise causes the

gate to attenuate input signals below +10dBu. The amount of attenuation depends on the setting of

the depth control.

Depth Control

This control sets the amount of attenuation applied to the signal once it is below the threshold.

Release Control

Adjusting the Release control sets how fast the gate closes once the input signal falls below the

threshold. The release rate is from .01 seconds (fully counter clockwise) to 3 seconds (fully clockwise).

Note: The gate release rate is accelerating, in that the dB/Sec rate continually increases as the gate

closes.

1074 User Manual